To prevent or limit cuts and tears in the conveyor belt caused by sharp material or improperly loaded material on the conveyor, the belt carcass is protected by transverse metal wires placed over the plies and a special top rubber layer resistant to tearing and wear. This allows you to protect the core of your belt and extend its service life. These belts can operate with pulleys of standard diameters.
UNIBREAK is manufactured in two versions:
- UNIBREAK - Metal wire diameter 1.35 mm and pitch 8.0 mm
- UNIBREAK F - Metal wire diameter 1.35 mm and pitch 3.0 mm
The carcass of these conveyor belts is made of a combination of polyester fabric in the warp and polyamide in the weft, resistant to atmospheric conditions such as water and moisture. This structure provides high tensile strength in the longitudinal direction and high transverse flexibility.
Manufactured according to DIN 22102. Available with a maximum width of up to 2000 mm and a strength of 3150 N/mm.
Applications include the recycling industry, aggregate extraction, the cement industry, quarries, etc.
