preloader

Tooth Systems

ESCO S95

S95 system is specifically designed for draglines, cable shovels, large hydraulic face shovels and hoe buckets. The complete 2-piece system includes the nose with its hammerless Sidewinder pin, adapters with optional wear caps, and Posilok teeth. The teeth are available in several designs to handle the most demanding mine site needs.
It gives you:
Strong positive lock requires no adjustment during normal adapter life
Quick point replacement to minimize downtime
A wide selection of point shapes available to match any applications

ESCO SV2

The SV2 tooth system provides enhanced productivity, reliability and safety over the previous two-piece mining tooth systems. Available for a variety of machines, mining and heavy construction applications, ESCO offers a full complement of adapters and points shapes.
Here’s what you get with the SV2 system:
A hammerless locking system improves the safety
Longer wear life and greater productivity from a slim nose profile with up to 72% useable wear metal
Up to 30% increase in nose strength depending on the size and tooth shape.

ESCO Nemisys

Nemisys - 3 parts system
ESCO engineered the new Nemisys system from the ground up. The lip, shrouds and teeth were developed simultaneously to maximize machine productivity and availability.
All components are sized to better match today's machines, and a streamlined profile optimizes production and machine working cycles.
The new tooth and shroud systems, with rugged hammerless locking mechanisms, help reduce maintenance costs through improved reliability, faster and safer replacement, and improved lip coverage.
The Nemisys system offers:
Four system sizes to fit large excavators, draglines and cable shovels
Slim profile lip and tooth system that requires less energy to dig
Up to 19% more usable wear metal on teeth for more uptime
Standard Duty lips weigh 17% less on average
20% larger thrust face area on the system nose for better reliability
Contoured lip that reduces peak stresses by a minimum of 12%
Shrouds and adapters that cover up to 77% more area on the frontal lip edge​​​​​​
Field trials and customer testimonials from around the world have demonstrated the value that the Nemisys system provides in lowering your cost per ton:
6.5% reduction in fuel consumption
67% reduction in GET related downtime
27% longer GET service life

Ultralok

Системата Ultralok на ESCO е съставена от две части с вграден клин, което повишава безопасността, намалява складовия инвентар и опростява подмяната.
Предимства на системата Ultralok:
Подобрена производителност при работа
Опростена подмяна на зъбите
Намален престой на машината

Super V

ESCO's Super V system is a universal tooth system for construction and mining machines consisting of an adapter, a tooth and a reusable retainer for larger sizes.
The system is highly efficient with various tooth shapes for different working conditions and easy to install.
The alternative of Super V is BYG`s Twister tooth system.

Twister

Twister is a universal tooth system for construction and mining machines consisting of an adapter, a tooth and a reusable retainer for larger sizes.
The larger adapter sizes as an option could have removable wear-resistant caps.
The main components of the system are interchangeable with Super V system.

Caterpillar DRP

Classic tooth system known as CAT J-system which has wide application. It consists of an adapter, a tooth and pin and retainer. Applicable for heavy conditions like hot slag and etc. Some of the larger sizes are available with the option of replaceable wear-resistant adapter cap and tooth wear shoe for loaders, in order to extend the time for replacement of the main components.
The J-system has a wide selection of tooth shapes for excavators and loaders, depending on the working conditions with sizes from J-200 to J-800.

Caterpillar K-Series

The CAT K-series is an innovative tooth system that combines the benefits of the Super V system with the good traditions of Caterpillar.
Available sizes: K-80, K-90, K-100, K-110, K-130, as well as for mining loaders in size K-150.

Hyundai

Hyundai tooth system for excavators and loaders in which the tooth is attached to the adapter by side pin and retainer.
The system provides a variety of sizes and applications for different working conditions, such as some of the larger ones are identical to those of the Caterpillar DRP (J-sizes).

Komatsu

Conventional system for excavators and loaders where the tooth is mounted by spring pin.
Available in different sizes and teeth shapes for various purposes.

Komatsu K-max

Komatsu K-max tooth system for excavators and loaders. The system consists of an adapter, a tooth and a hammerless side pin with a lock. There is a large selection of tooth shapes for different working conditions. For larger adapter sizes there is an option with a removable protective cover to extend the life of the adapter. Sizes from K15 to K50.

Case Poclain

Case Poclain is a tooth system for excavators, in which the tooth is fixed to the adapter by vertical, rubber-metal pin. Available in several sizes and shapes: Standard, SYL, Rock and Penetration (for clay or frozen soil).

Orca, Fiat Hitachi

The system is characterized by a tooth with side "ears" which fit to the adapter. The installation of the tooth is done by a horizontal pin and a retainer.

Bofors

Bofors tooth system for excavators and loaders.
It consists of an adapter and a tooth with a "tail".
The installation of the tooth depends on its size and could be done with different fixators: horizontal pin, rubber-metal pin, vertical pin, T-bolt.

Conical

Conical is a tooth system for excavators and loaders which could be mounted with a vertical pin and a rubber retainer. Available in different sizes and for various working conditions. The smallest size 18 is also used for augers. Caterpillar has the same type of installation for the small dimensions.

Doosan, Volvo

The tooth system is characterized by a complicated geometry when the tooth fits to the adapter which spreads the stress more evenly during operation.
The installation of the tooth is performed by the classic method with a horizontal pin and a retainer.

Volvo

Volvo's specific tooth system for excavators and loaders is similar, but not compatible with KingMet.
The main elements are identical and the installation is also done with a two component vertical pin.
The difference between the two systems is in the geometry of the adapter cone and the corresponding tooth.

Combi Parts

Combi parts is a high-quality tooth system for excavators and loaders wich range is upgraded with C-Rex and ProClaws systems.
The installation of the teeth is done by:
- horizontal rubber-metal pin for Combi parts system
- reusable and user friendly mechanical lock for ProClaws system
- horizontal reusable locking pin and integrated locking ring for C-Rex system

Liebherr

Tooth system for excavators in which the tooth is mounted by a horizontal pin and rubber retainer.
It is produced in different sizes and shapes of teeth for various applications.

Kingmet

A tooth system in which the adapter and the tooth are assembled by vertical pin. Also the tooth has side "ears" that fit tightly to the adaptor. The double stabilizing surface counteracts the force caused by vertical stress, so that the tooth, the adapter and the pin are less stressed.

Uni-Z

UNI-Z is a tooth system with locking which secures a tight fit between the tooth and the adapter fixed by a spring pin.

Helilok, Vertalok

Outdated tooth system where the tooth is mounted with a metal bracket at Helilok and with a vertical pin and a rubber-metal retainer at Vertalok. Their improved version is Super V.

Monoblock

Bolt-on tooth system suitable mainly for combined and mini excavators and loaders.

Ripper teeth

Ripper teeth with conventional and integrated systems for hammerless assembly.
Fully compatible with adapters and shanks - original production of Caterpillar, Esco, Komatsu, Liebherr and others.
Full range of all sizes in stock.